Products

Alcaline Cleaners

Pol Star

Textile, leather and alcantara cleaner
Effective neutral cleaner with protection formula for leather, alcantara and textiles such as upholstery and carpets. The dirt is removed from deep in the fibres by fine-pored foam lamellas and can be wiped up with a wet/dry vacuum cleaner or a damp cloth. Does not leave any water marks and preserves the original waterproofing. The conserver protects the parts against becoming dirty again quickly.
1l
92001US

Leather and Plastic Interior

Leather Star

Deep care for leather
Premium leather care with a natural semigloss finish. For revitalising and preserving smooth leather, suede and perforated leather materials on vehicle seats, sofas, etc. Leather Star is easy to use and creates a pleasant fragrance, a colour intensifying appearance and a supple and soft feel, without causing undesirable slipperiness. The use of premium active ingredients from cosmetics makes the leather supple and provides prolonged protection against new dirt and becoming brittle.
1l
238001US

Shampoos

Gentle Snow Foam

Cleaning foam pH Neutral
The high foaming, pH neutral cleaning foam with a unique cherry fragrance can be used as a Snow Foam for pre-washing when applied using a foam gun or foam sprayer, and as a shampoo for manual car washing. Gentle Snow Foam develops an even, well moistened foam blanket that sticks to the entire surface, thereby allowing a long application time. Due to its pH neutral formula, it does not corrode waxed or sealed surfaces. The Gentle Snow Foam can be enriched with the Green Star to create an active foam in order to quickly remove stubborn dirt and insects.
1l
383001US

Rubber and Plastics Exterior

Motorplast

Special engine conserver
Naturally shiny, water-displacing conserver for engines, housing parts, rubber hoses and power units of cars, commercial vehicles, etc., with pleasant fragrance. Treated parts regain their new appearance. The complete drying (no lubricating film) prevents dirt sticking. The power units are protected from corrosion and environmental factors by the permanently elastic protective film. Suitable for use on dry and wet surfaces. Temperature-resistant to 250°C. With Daimler approval.
500ml
236500US

Glass, Surfaces and Process Water

Clay Spray

Lubricant spray for clay bar, silicone-oil-free
Mild, low-residue lubricant free of coating defcts. Effective for use with clay bars or pads. The excellent lubricity minimises surface scratching during cleaning. Unlike other lubricants it does not leave behind any film. Residue is easy to wipe away with a microfibre cloth. Due to the specialised formula the clay bars or pads do not dissolve and last considerably longer.
500ml
368500US

Glass Cleaner

Glass cleaner Pro
Ready-to-use glass cleaner for all smooth surfaces on vehicles, buildings, etc. Effortlessly removes the most stubborn dirt including oil, grease, insects and similar. Runs off quickly without streaks and its gloss and smoothness additive improves the wiping effect of the cleaning cloth. With fresh fragrance.
500ml
302500US

Body & Paint

Heavy Cut H9.01

Coarse polishing compound, silicone-oil-free
Innovative machine polish for fast reworking of heavily weathered paintwork, elimination of deep scratches, and effective removal of paint mists and sanding traces of up to 1,200 grain. With its extremely homogeneous abrasive grain, Heavy Cut 9.01 achieves an extremely high level of cut with an excellent gloss level. Can be polished for prolonged periods without sticking and with low dust formation. Ideally suited to all types of paint (both soft and scratch-proof).
Cut: 9,0
Gloss: 5,0
250 ml
402250US
1 l
402001US

Fine Cut F6.01

Fine polishing compound, silicone-oil-free
Intelligent machine polish of the latest generation with unique aluminium oxide quality. The intelligent grain size ensures very quick, complete removal of wash system scratches and similar traces of use and gives the paintwork a long-lasting deep sheen. Sanding marks left behind by 2500 grade sanding media are removed effortlessly. Fine Cut F6.01 is therefore ideally suited for perfect reconditioning of medium to heavily weathered paintwork. Perfectly coordinated for the treatment of scratch-proof paint.
Cut: 6,0
Gloss: 7,0
250 ml
405250US
1 l
405001US

Micro Cut M3.02

Micro polishing compound, silicone-oil-free
Micro Cut M3.02 is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding marks to P3000 grain size on all paint systems (including scratch-resistant). Through the use of highly specialised, extremely homogenous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades. Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered over. Micro Cut M3.02 is extremely economical, easy to polish and removable without leaving traces.
Cut: 3,2
Gloss: 9,0
250 ml
403250US
1 l
403001US

Micro Cut & Finish P3.01

Micro polishing compound with carnauba wax
Micro Cut & Finish is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding marks to P3000 grain size on all paint systems (including scratch-resistant) with simultaneous long-term sealing with high degree of gloss and smoothness. Through the use of highly specialised, extremely homogenous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades. Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered over. Micro Cut & Finish is economical, easy to polish and to remove. Contains carnauba wax and non-fugitive silicones.
Cut: 3,2
Gloss: 9,5
250 ml
404250US
1 l
404001US

Heavy Cut Pad

Polishing Pad
Abrasive sponge for removing strong weathering and deep scratches using the Heavy Cut H9.01. The short height of 23mm creates low torsion forces, very good handling and the highest level of stability. The special density of the foam material enables long-lasting compression hardness during polishing. The optimised reticulation (open cellular structure) and cell count contribute to a high level of abrasiveness and excellent hygiene factors. The milling edge ensures extra flexibility for the pads, enabling them to fit around contours easier. The colourful non-woven material, suitable for polishing, ensures process safety.
Compression hardness: 17. Abrasiveness: 9
Ø 76x23mm
999577
Ø 150x23mm
999579
Ø 126x23mm
999578

Micro Cut Pad

Polishing Pad
High-quality special sponge for removing fine scratches, holograms and polishing marks using the Micro Cut M3.02 and Micro Cut & Finish P3.01. The short height of 23mm creates low torsion forces, very good handling and the highest level of stability. The special density of the foam material enables long-lasting compression hardness during polishing. The optimised reticulation (open cellular structure) and cell count contribute to a high-shine finish and very good hygiene factors. The milling edge ensures extra flexibility for the pads, enabling them to fit around contours easier. The colourful non-woven material, suitable for polishing, ensures process safety.
Compression hardness: 10. Abrasiveness: 5.
Ø 76x23mm
999583
Ø 126x23mm
999584
Ø 150x23mm
999585

Finish Spray exterior

Quick detailer with limescale remover
All-round detailing spray for fast care of all external vehicle surfaces such as paintwork, glass and plastics. With its special formula even stubborn limescale stains are removed quickly and without leaving any residue. Cleans, maintains and preserves in a single step. Depth of colour is returned leaving a smooth brilliant high gloss free from streaks. Finish Spray exterior is quickly removed, is easy to use and protects the surfaces against new dirt.
1l
285001US

Quick & Shine

Allround finish spray
The all-round quick detailer for all smooth and painted surfaces (vehicle paintwork, painted wood, glass, plastic parts, consoles, painted furniture and musical instruments, stainless steel surfaces, etc.). Cleans, maintains and preserves in a single step. The surfaces receive a colour deepening and a streak-free, brilliant gloss. Finger marks and light dirt are removed quickly and easily. The treated parts are conserved and repel water and dirt and are protected from becoming dirty again quickly (lotus effect). Quick & Shine is quickly removed and is therefore easy to use. Previously applied veneers or waxes are preserved. Particularly suited for quick finishing of exhibited goods in showrooms or at fairs, as well as for quick valeting of vehicles. With Daimler approval.
1l
168001US

Quick Finish

Allround finish spray, silicone-oil-free
An all-round talent for all smooth and painted surfaces (vehicle paintwork, painted wood, glass, plastic parts, dashboards, painted furniture and musical instruments, stainless steel surfaces, etc.). Cleans, cares and seals in a single step. Fingerprints and light dirt are removed quickly and easily. Surfaces are left with a brilliant shine, high surface smoothness and good hydrophobic properties. Quick Finish runs off quickly without leaving streaks and is therefore easy to apply. Previously applied polishes and waxes are retained. It is particularly well suited to quick finishing of exhibited goods in showrooms or at trade fairs, as well as for quick valeting of vehicles. Also suitable for use in painting applications.
1l
314001US